Sterilight® Copper 4 GPM Ultraviolet Water Sterilizer System

Sterilight's Copper™ line of disinfection systems is our "entry" level UV system. This modular system, incorporating our integral Copper™ ballast, is ideal for small POU applications such as post filtration, or as a pre or post application on a residential RO system. The electronic Copper™ ballast is available in either a 100-130V./50-60Hz. supply or a 200-250V./50-60Hz. supply and comes with an LED "power-on" indicator. Three models are available in flow rates of 1, 2.5 and 4 gpm (4, 9.5 and 15 lpm).

These systems are manufactured with axial flow reactors in 304 stainless steel and come with unique combinations ports with 3/8" FNPT / 1/2" MNPT connections. Although Copper is our most economical system, quality is evident throughout with fire-polished domed quartz sleeves and seamless connections. Sterilume™-EX coated low pressure germicidal UV lamps can be easily changed without interrupting the water flow and the overmoulded integral ballast/connector can be removed without any additional tools.

Features

• Low flow 4.0 gpm capacity (Dose Dependent)
• New Sterilume-EX UV lamps, these hard glass, 254 nm ultraviolet lamps feature advanced proprietary lamp technology allowing for consistent UV output over the life of the lamp coupled with uniform temperature distribution. The result is that Sterilume-EX lamps provide the required output over the entire 9000 hour lamp life
• Easy lamp replacement without having to disconnect the water supply
• Seven year warranty on reactor chamber for unparalleled protection
• Polished 304 L stainless reactor chamber
• Maximum UV output with the highest quality quartz sleeve
• 1/2" FPT & 3/8" MPT connections for quick and easy installation
• 99.99% destruction of bacteria, virus and protozoan cysts (Giardia Lamblia and Cryptosporidium) at rated flow
• Nature's way to protect your water without the addition of harmful chemicals
• Open end quartz sleeve and aluminum gland nuts for optimum operating temperature and sealing efficiency

It is strongly recommended for maximum efficiency of your UV Sterilization that you pre-filter your water with a 5 µ sediment cartridge.

Do not connect plastic pipe or tubing directly to UV system because the UV light will break down plastic over time. The best way to make the connection is with Dielectric Unions that allow for a connection from stainless steel to copper that will not corrode. We have dielectric unions available in ½", ¾" & 1" sizes.