Sterilight® Cobalt "PLUS" 13 GPM Ultraviolet Water Sterilizer System

The Cobalt™ "PLUS" line of disinfection systems incorporate high-output UV lamp technology coupled with efficient axial flow reactors. This modular line of UV disinfection systems incorporate a UV intensity monitor for conditions where water quality is unknown and/or a monitoring system is required. In flow rates of 8-40 gpm (30.3-151.4 lpm), these systems are ideally suited for commercial/industrial, point-of-entry applications with high flow rates and constant flow demands. Using high-output Sterilume™-HO coated low pressure germicidal UV lamps, these systems provide an economical way of treating water requiring a 99.99% reduction in bacteria and viruses.

Features

• 13.0 gpm capacity (dose 30mJ/cm²)
• Sterilume-HO UV lamps
• Optional solenoid available
• Easy lamp replacement without having to disconnect the water supply
• Visual lamp-on indicators and audible lamp failure indicator
• Optional Y cable to provide connection to a remote monitoring system
• Seven year warranty on reactor chamber for unparalleled protection
• Polished 304 L stainless reactor chamber
• Maximum UV output with the highest quality quartz sleeve
• 3/4" FPT & 1" MPT connections for quick and easy installation
• 99.99% destruction of bacteria, virus and protozoan cysts (Giardia Lamblia and Cryptosporidium) at rated flow
• Nature's way to protect your water without the addition of harmful chemicals
• Open end quartz sleeve and aluminum gland nuts for optimum operating temperature and sealing efficiency

It is strongly recommended for maximum efficiency of your UV Sterilization that you pre-filter your water with a 5 µ sediment cartridge.

Do not connect plastic pipe or tubing directly to UV system because the UV light will break down plastic over time. The best way to make the connection is with Dielectric Unions that allow for a connection from stainless steel to copper that will not corrode. We have dielectric unions available in ½", ¾" & 1" sizes.