Shelco 20" 316L Stainless Steel Single Cartridge Housing with Center Rod (¾" Ports)
Model #: FOS-80-6-316
|
Shelco's proven single shell design has been a standard in the industry for over 30 years. Available in 304L or 316L Stainless Steel, Brass Nickel Plated Head with a 304L Body or Cast Iron Head with a Steel Body, the FO series is perfect for almost any application. The maximum design working pressure is 250psi @ 275°F. The FO series is available in a wide range of connection sizes to fit your application as well as a wide variety of gasket options that make this housing compatible with almost any fluid. The standard gasket material is Buna-N. Please refer to our ordering guide for a complete list of options or contact one of our technical specialists for help.
Features and Benefits
- Housing accepts double-open-end cartridges
- Simple bolt-n-nut design for quick cartridge change outs
- Knife edge seal at both cartridge ends to eliminate by-pass
- Heavy duty construction for durability
- Flanged, sanitary and BSP ports available
- Inline ports for easy installation
- 3/4" ports
Model |
Material |
Cartridge Length |
Pipe Size FNPT |
Optional Material |
FO
|
S = 304L Stainless Steel with stainless steel drain plugs
|
38 = 3-3/4"
39 = 4-7/8"
78 = 9-3/4"
80 = 20"
90 = 30"
|
4 = 1/2"
6 = 3/4"
8 = 1"
|
Blank = 304L
316 = 316L
|
Options |
Gasket |
Blank = None
BSP = BSP Thread
1F = 1" Flange
1TC = 1" Ferrules
*Vent = Vent Screw
*GP4 = 1/4" gauge port
*GP8 = 1/8" gauge port
BR = Bracket Kit
DSG = Variable Seal (spring loaded)
TH = Tee Handle
10 = 10" Cartridge Length
195 = 19-1/2" Cartridge Length
294 = 29-1/4" Cartridge Length
|
Blank = Buna
E = EPR
S = Silicone
V = Viton
T = Teflon
N = Neoprene
VELL = Vellumoid
|
* When ordering vents or gauge ports you must specify location: I=Inlet, O=Outlet, I/O=Inlet & Outlet. Example: GP4I or GP4I/O
|