Phone:  (800) 955-0556  •  (770) 874-2608       Fax:  (770) 424-2464       sales@h2ofilterwarehouse.com

Pentair Encapsulated 50 GPD High Recovery Thin Layer Composite Reverse Osmosis Membrane with Built-In Drain Flow Control (Drain Flow Required - 150ML)

Model #: GRO-50EN, Part #: 4004424


GRO-50EN
GRO-50ENModel #:  
635510408017UPC #: 
16 UnitsCase Qty: 
26 lbs.Case Wt: 

Click for a Larger ImageClick for a Larger Image Print This PagePrint This Page Email to a CustomerEmail to a Customer Bookmark This PageBookmark This Page Contact UsContact Us
Download Product Sheet PDF format, requires Adobe Acrobat to viewRequires Adobe Acrobat
NSF® Certified
NSF 58 Certified
Standard Reverse Osmosis Membranes send 3-4 gallons of water to the drain for each gallon of purified water produced. The new Pentair GRO Membranes have a 1 to 1 ratio on purified water to rejected water.

Pentair TLC Residential Membranes use an industry leading state-of-the-art TLC (Thin Layer Composite) membrane providing high quality water for a broad range of water chemistries. Each membrane is required to meet our factory's strict performance requirements prior to shipment.

Features:

  • Double the recovery over standard reverse osmosis elements
  • Rejection performance comparable to standard reverse osmosis elements
  • High rejection stability at high input TDS
  • TLC Thin Layer Composite membrane
  • 100% dry membrane maximizing shelf life


Model Number Part Number Nominal Performance
Flow* GPD (LPD) Rejection Rate
GRO-50EN 4002574 50 (189) 96%
GRO-75EN 4002575 75 (284) 96%
TLC-24 655006-00 24 (91) 98%
TLC-36 655007-00 36 (136) 98%
TLC-50 555694-00 50 (189) 98%
TLC-75 555693-00 75 (284) 98%
TLC-100 655045-00 100 (378) 98%

(*Nominal performances are based on a 500 ppm softened tap at 65 psig (4.48 bar), 77°F (25°C), 15% recovery after 24 hours. Individual element flux may vary +/- 15%.)



Operational Limits:

  • Maximum Pressure: 125 PSI (6.90 bar)
  • Maximum Temperature: 120°F (49°C)
  • pH: 4-11
  • Free Chlorine: 0.1 ppm

Filters and membrane elements are not to be installed on microbiologically unsafe water supplies. TLC Membranes are not certified to sanitize water, remove cysts, bacteria, or viruses. Filter and membrane element performance can be affected by fluctuations in water quality.