Pentek Microguard 10" Carbon Block Membrane Filter Cartridge
Model #: MG-10MCB, Part #: 255420-43
|
Materials of Construction:
- Membrane: Polyethersulfone
- Membrane Assembly: Polystyrene, epoxy resin
- Carbon Pre-Filter: MG-10MCB with Fibredyne technology contains activated carbon with synthetic Polymeric fibers and binders
- O-ring Seals: EPDM
- End Caps: Top: Polystyrene, Bottom: Polypropylene
- Netting: Bottom: Polyolefin (MG-10MCB only)
Recommended Operating Conditions:
- Water Temperature Range: 40-140°F (4.4-60°C)
- Pressure Differential: 88 psi (6.1 bar), max.
- Storage Temperature Range: 35-104°F (6.0-40°C)
- pH Range: 2-12
- Operating Pressure Range: 5-88 psi (0.35-6.1 bar), max.
- Water Turbidity: < 1 NTU
Performance Specifications:
- Bacteria Reduction: > 99.9999% (> 6-Log), challenged with > 50,000,000 organisms per 100 mL.
- Organism: Brevundimonas diminuta (0.2 micron in size).
- Method: Modified USEPA Guide Standard and Protocol for Water Purifiers, 1987
- Cyst Reduction: > 99.9999% (> 6-Log), challenged with > 1,000,000 microspheres per mL.
- Method: NSF/ANSI Standard 53, surrogate cyst procedure using 3.0 micron latex microspheres.
MG-10MCB |
10" × 2-7/8" |
0.15 µm |
1 GPM |
11 psid @ 1.0 GPM |
200-600 gal |
MG-10T |
10" × 2-7/8" |
0.15 µm |
3 GPM |
13 psid @ 3.0 GPM |
600-1,800 gal |
* Capacities may vary depending on local water quality, type of pre-filtration and acceptable minimum flow rate.
|